With regulation of the minimum inside the spindle.
3/8" G threaded coupling.
The injector which can be regulated for the max. can be mounted directly on the valve or near the Venturi.
cm4.pdf
With possibility of regulating the minimum.
Adjustment is carried out by means of the bypass, via the knob-holder spindle.
The coupling to the burner is flanged for both Ø 16 and Ø 18 pipes, shich must be perforated by a drill and not by a punch. The flanges can be in two versions (see brochure): one with the screw which pushes the pipe against the gasket and the other which forces the pipe against the gasket for pushing at 45° the two half-flanges which are brought close together. 58.pdf
With possibility of regulating the minimum.
Adjustment is carried out by means of the bypass, via the knob-holder spindle.
The coupling to the burner is 1/8" gas and tapered.
The valves can be ordered with a preset fixed minimum. 21.pdf
PNEUMATIC DIVIDING HEADS
2500.pdf art. 2500/1 Pneumatic dividing heads with pneumatic embodied clamping units, grip piece till Ø 17 mm
art. 2500/2 Pneumatic dividing heads with pneumatic embodied clamping units, grip piece till Ø 42 mm