Linux version 2.6.0-test8 (root@dreamland) (gcc version 3.2.3) #1 Sat Oct 18 17:57:35 CEST 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
767MB LOWMEM available.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192496 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f75b0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux-2.6.0t8 ro root=305 BOOT_FILE=/bzImage-2.6.0-test8 video=radeonfb:1024x768-8@60
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1470.676 MHz processor.
Console: colour VGA+ 80x25
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():1
Call Trace:
[] __might_sleep+0xa0/0xe0
[] acquire_console_sem+0x3a/0x60
[] register_console+0x9e/0x320
[] redraw_screen+0xb8/0x180
[] vgacon_save_screen+0x0/0x80
[] con_init+0x22e/0x280
[] _stext+0x0/0xf0
[] console_init+0x31/0x40
[] start_kernel+0x127/0x220
[] unknown_bootoption+0x0/0x100
Memory: 774132k/786368k available (2396k kernel code, 11468k reserved, 797k data, 168k init, 0k highmem)
Debug: sleeping function called from invalid context at mm/slab.c:1857
in_atomic():1, irqs_disabled():0
Call Trace:
[] __might_sleep+0xa0/0xe0
[] kmem_cache_alloc+0x65/0x70
[] _stext+0x0/0xf0
[] kmem_cache_create+0x74/0x4f0
[] _stext+0x0/0xf0
[] kmem_cache_init+0x17e/0x330
[] start_kernel+0x137/0x220
[] unknown_bootoption+0x0/0x100
Calibrating delay loop... 2891.77 BogoMIPS
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1469.0806 MHz.
..... host bus clock speed is 267.0237 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:...................................................................................................................
Table [DSDT](id F004) - 464 Objects with 38 Devices 115 Methods 31 Regions
ACPI Namespace successfully loaded at root c046409c
spurious 8259A interrupt: IRQ7.
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000004020 on int 9
Completing Region/Field/Buffer/Package initialization:.............................................................................
Initialized 31/31 Regions 13/13 Fields 20/20 Buffers 13/13 Packages (472 nodes)
Executing all Device _STA and_INI methods:.......................................
39 Devices found containing: 39 _STA, 2 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: the driver 'system' has been registered
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf10
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf40, dseg 0xf0000
pnp: match found with the PnP device '00:07' and the driver 'system'
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: match found with the PnP device '00:0b' and the driver 'system'
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=12, xclk=27000 defaults
radeonfb: probed SDR SGRAM 131072k videoram
radeon_get_moninfo: bios 4 scratch = 2000002
radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
Machine check exception polling timer started.
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (46 C)
hStart = 1032, hEnd = 1176, hTotal = 1344
vStart = 771, vEnd = 777, vTotal = 806
h_total_disp = 0x7f00a7 hsync_strt_wid = 0x920412
v_total_disp = 0x2ff0325 vsync_strt_wid = 0x860302
post div = 0x4
fb_div = 0x74
ppll_div_3 = 0x20074
ron = 712, roff = 14840
vclk_freq = 6525, per = 530
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0c' and the driver 'serial'
pnp: match found with the PnP device '00:10' and the driver 'serial'
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0f' and the driver 'parport_pc'
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: QUANTUM FIREBALLlct10 10, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CRD-8520B, ATAPI CD/DVD-ROM drive
hdd: WAITEC ALADAR/1, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > p3
hdb: max request size: 128KiB
hdb: 20044080 sectors (10262 MB) w/418KiB Cache, CHS=19885/16/63
/dev/ide/host0/bus0/target1/lun0: p1 p2
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Console: switching to colour frame buffer device 128x48
mice: PS/2 mouse device common for all mice
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
NET: Registered protocol family 1
NET: Registered protocol family 17
BIOS EDD facility v0.10 2003-Oct-11, 2 devices found
Please report your BIOS at http://domsch.com/linux/edd30/results.html
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
Adding 265064k swap on /dev/hdb2. Priority:9 extents:1
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda7) for (hda7)
Using r5 hash to sort names
SGI XFS for Linux with large block numbers, no debug enabled
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
XFS mounting filesystem hda8
Ending clean XFS mount for filesystem: hda8
NTFS driver 2.1.4 [Flags: R/O DEBUG MODULE].
NTFS-fs warning (device hda1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
NTFS volume version 3.1.
FAT: Unrecognized mount option "mode=775" or missing value
Real Time Clock Driver v1.12
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
Intel(R) PRO/100 Network Driver - version 2.3.30-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
CBQ: class 00010001 has bad quantum==0, repaired.
e100: eth0 NIC Link is Up 100 Mbps Full duplex
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
eth0: no IPv6 routers present
PCI: Setting latency timer of device 0000:00:11.5 to 64
registering 0-0290
sensors: numerical sysctl 7 2 1 is obsolete.
Stopping tasks: =======================================|
Freeing memory: .............|
hdd: start_power_step(step: 0)
hdd: completing PM request, suspend
hdc: start_power_step(step: 0)
hdc: completing PM request, suspend
hdb: start_power_step(step: 0)
hdb: start_power_step(step: 1)
hdb: complete_power_step(step: 1, stat: 50, err: 0)
hdb: completing PM request, suspend
hda: start_power_step(step: 0)
hda: start_power_step(step: 1)
hda: complete_power_step(step: 1, stat: 50, err: 0)
hda: completing PM request, suspend
PM: Attempting to suspend to disk.
PM: snapshotting memory.
PM: Image restored successfully.
Debug: sleeping function called from invalid context at include/asm/semaphore.h:119
in_atomic():1, irqs_disabled():0
Call Trace:
[] __might_sleep+0xa0/0xe0
[] device_resume+0x22/0x50
[] finish+0xb/0x40
[] pmdisk_free+0x8/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] __mod_timer+0x320/0x840
[] pci_conf1_write+0x15c/0x230
[] pci_read+0x3b/0x40
[] schedule_timeout+0x8c/0xe0
[] pci_write+0x3c/0x40
[] process_timeout+0x0/0x10
[] pci_set_power_state+0xe4/0x190
[] e100_resume+0x28/0x70 [e100]
[] pci_device_resume+0x24/0x30
[] resume_device+0x27/0x30
[] dpm_resume+0x38/0x60
[] device_resume+0x35/0x50
[] finish+0xb/0x40
[] pmdisk_free+0x8/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] recalc_task_prio+0x90/0x1a0
[] __alloc_pages+0xac/0x350
[] sys_sched_yield+0x13d/0x210
[] e100_exec_non_cu_cmd+0x4a1/0x790 [e100]
[] e100_setup_iaaddr+0x50/0x80 [e100]
[] e100_configure_device+0xa8/0x100 [e100]
[] e100_deisolate_driver+0xdc/0x100 [e100]
[] e100_resume+0x62/0x70 [e100]
[] pci_device_resume+0x24/0x30
[] resume_device+0x27/0x30
[] dpm_resume+0x38/0x60
[] device_resume+0x35/0x50
[] finish+0xb/0x40
[] pmdisk_free+0x8/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] __alloc_pages+0xac/0x350
[] sys_sched_yield+0x13d/0x210
[] e100_exec_non_cu_cmd+0x4a1/0x790 [e100]
[] e100_set_multi_exec+0x92/0xc0 [e100]
[] e100_configure_device+0xca/0x100 [e100]
[] e100_deisolate_driver+0xdc/0x100 [e100]
[] e100_resume+0x62/0x70 [e100]
[] pci_device_resume+0x24/0x30
[] resume_device+0x27/0x30
[] dpm_resume+0x38/0x60
[] device_resume+0x35/0x50
[] finish+0xb/0x40
[] pmdisk_free+0x8/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] show_trace+0x45/0x90
[] __alloc_pages+0xac/0x350
[] sys_sched_yield+0x13d/0x210
[] e100_exec_non_cu_cmd+0x4a1/0x790 [e100]
[] e100_config+0x1c4/0x280 [e100]
[] e100_force_config+0x109/0x1b0 [e100]
[] e100_configure_device+0xef/0x100 [e100]
[] e100_deisolate_driver+0xdc/0x100 [e100]
[] e100_resume+0x62/0x70 [e100]
[] pci_device_resume+0x24/0x30
[] resume_device+0x27/0x30
[] dpm_resume+0x38/0x60
[] device_resume+0x35/0x50
[] finish+0xb/0x40
[] pmdisk_free+0x8/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
hda: Wakeup request inited, waiting for !BSY...
hda: start_power_step(step: 1000)
blk: queue efc9bc00, I/O limit 4095Mb (mask 0xffffffff)
hda: completing PM request, resume
hdb: Wakeup request inited, waiting for !BSY...
hdb: start_power_step(step: 1000)
blk: queue efc9b800, I/O limit 4095Mb (mask 0xffffffff)
hdb: completing PM request, resume
hdc: Wakeup request inited, waiting for !BSY...
hdc: start_power_step(step: 1000)
hdc: completing PM request, resume
hdd: Wakeup request inited, waiting for !BSY...
hdd: start_power_step(step: 1000)
hdd: completing PM request, resume
Restarting tasks...<3>bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] wake_up_process+0x26/0x30
[] thaw_processes+0xbb/0x110
[] acpi_pm_finish+0x16/0x3b
[] finish+0x19/0x40
[] pm_suspend_disk+0x7d/0xc0
[] enter_state+0x98/0xa0
[] state_store+0x6d/0x77
[] subsys_attr_store+0x35/0x40
[] flush_write_buffer+0x39/0x50
[] sysfs_write_file+0x51/0x60
[] vfs_write+0xad/0x120
[] sys_write+0x3f/0x60
[] syscall_call+0x7/0xb
done
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] sys_write+0x3f/0x60
[] work_resched+0x5/0x16
bad: scheduling while atomic!
Call Trace:
[] schedule+0x8b2/0x8c0
[] sys_sched_yield+0x13d/0x210
[] search_exception_tables+0x24/0x40
[] setup_frame+0xb4/0x1f0
[] coredump_wait+0x83/0xf0
[] fixup_exception+0x24/0x70
[] __is_prefetch+0x77/0x250
[] do_coredump+0x26f/0x3a7
[] __dequeue_signal+0xf5/0x1a0
[] dequeue_signal+0x2d/0x90
[] get_signal_to_deliver+0x41f/0xa10
[] do_signal+0xb4/0xf0
[] recalc_task_prio+0x90/0x1a0
[] schedule+0x374/0x8c0
[] do_page_fault+0x0/0x574
[] do_notify_resume+0x57/0x80
[] work_notifysig+0x13/0x15
note: bash[394] exited with preempt_count 1
e100: eth0 NIC Link is Up 100 Mbps Full duplex