Legend 6

(Ref: "SUONO" Stereo & Hi-FI Italian Magazine "L’amateur professionnel" )

December-97 page 104

The Legend 6 is a 20 litres frontal load bass reflex/horn loudspeaker system fully handcrafted and manufactured in Italy with optimum design and high quality finishing sweet either for low power tube and solid state amplifiers. To return the real definition of the reproduced music program the Legend 6 system implements NO crossover on the woofer and a new central OGIVA (not shown in the photo). The choice avoids different time delays between fundamentals and harmonics into the band of main energy content (up to 3 Khz) during complex music signals, reproducing music programs as real as the source is. A real complement to it, it is the use of the RD BI-WIRING CABLE together with a NO-NEGATIVE FEEDBACK low power TUBE amplifier. To obtain the maximum results also the horn is FILTERED to the woofer using a first order crossover network with a 6 dB/octave slope. The components used are first class as the new generation Aliante AudioCap PPFF custom made capacitors.

• N. 1 - 21 cm (8.5 inches) Woofer with high quality low weight fiberglass cone on aluminum die-casting and front central OGIVA

• N. 1 - 6" Exponential HORN

• Mean Sensitivity: 95 dB / 2,83 Volt / 1 meter

• Frequency response at 2,83 Volt: 45- 20,000 Hz

• Woofer crossover type: No crossover

• Horn filter type: 6 dB slope with Aliante AudioCap PPFF custom made capacitors.

• Nominal impedance: 6 ohm

• Minimum impedance: 4 ohms at 200 Hz

• Power handling: to be connected to amplifiers up to 100 Watt rms. per channel

• Minimum power suggested:
  • 2,5 Watt per channel with the use of RD BI-WIRING CABLE and NO-NEGATIVE FEEDBACK low power TUBE amplifier
  • 5 Watt per channel with the use of NO NEGATIVE FEEDBACK SOLID STATE amplifier

• Golden connectors for BI-amp or BI-wiring ( RD BI-WIRING CABLE suggested)

• Dimensions: 430 (height) x 290 (Width) x 320 (Depth) mm

• Weight: 12 kg (26 lb.) each

• Cabinet hand-crafted from eight 1" thick solid walnut or cherry staves accomplished by MDF with patented anti-scratch varnish for a full Italian design.

Aliante s.r.l.

Viale dell’Industria 19

21052 Busto Arsizio (VA), ITALY.

Tel. +39 0331 354070

Fax. +39 0331 342445

Email: aliante@pn.itnet.it