<< RECONDITIONED CRUSHER IN STOCK >>
Special crushers for ferro-alloys
Concasseurs à machoires spéciaux pour ferro-alliages
Spezial Brecher für Ferrolegierungen
Extra förstärkta special krossar för Ferrolegeringar
JAW CRUSHER MPR 50
This crushers, specially designed for treating ferro alloys, is the only machines in the
world capable of accepting lumps of super refined ferro-chrome measuring up to 140 x
x 160 x 280 mm ( maximum weight 30÷40 Kg ) and of breaking them down to sizes
between 0 to 2÷4 Kg ; with an output of 2 to 3 Tons pour hour.
Considering the extraordinary toughness of ferrochrome, it will be clear that these
crushers are capable of treating all other ferro alloys with even greater ease.
The net weight of the crushers, which is built enterely of high tensile steel, is three
times the weight of an jaw crusher with the same size of inlet in current production.
The special bronze bearings with high features are amply lubricated by oil under
pressure, and the push rod is water cooled.
Moreover, special consideration has been paid to the design of the oil lubricating
system so that pollution of the product by oil is excluded.
The sectional drawing illustrates the very heavy construction and the robustness of
these crushers.
Type : MPR 50
It has been specially designed for the secondary crushing of ferro alloy
even the toughest and hardnest types, such as super refined ferrochrome
Opening size : 470 x 200 mm
Features : feed size to 140 x 160 x 280 mm ( maximum weight 30÷40 Kg )
obtaining down to sizes between 0 to 2÷4 Kg ;
with an output of 2 to 3 Tons pour hour.
Power installed : two electric motors 40 HP
Weight : 12.5 Ton (27660 lbs)
JAW CRUSHER MPR 30
This jaw crusher is running according to “Dodge Crusher principle” with axis of
joint of movable jaw holder set and lower part of this one (see section wiew).
Outlet slit does not differ very much what secures a regular gauging with finest
adjustments.
Type : MPR 30
Opening size : 320 x 130 mm
Features : This crusher, with much smaller measurement, but proportionally as strong as
previous ones, has been designed in order to reduce into granulated products
0÷10 to 0÷20 mm, bits from 2 and 3 Kg, obtained at the secondary MPR 50 jaw
crusher outlet.
Power installed : electric motors 25 HP
Weight : 4 Ton (8900 lbs)
Rational using of these jaw crushers which constitute range we have just described,
allows to get, through stepped reductions, conditioned ferro alloys by shape of granules
with more suitable sizes for direct utilizzation in steel works.
MORE INFORMATION CONTACT US
Tecnocava srl
New and used crushing equipment
Via Michelangelo, 67 - Desenzano del Garda (BS) - Italy
Tel. 0039.030.9141826
Fax. 0039.030.9912390
eMail: tecnocava@libero.it
