La configurazione principale di debian squeeze funziona (wifi, ethernet, webcam, audio, usb, card reader).
Pacchetti essenziali:
Pacchetti suggeriti:
Consiglio di aggiungere queste linee in /etc/apt/sources.list per alcuni degli ultimi pacchetti - guarda le linee da aggiungere
Informazione sull'hardware prese da linux:
Tipo dispositivo | Dispositivo | Funziona |
---|---|---|
cpu | Atom N450 | si |
display | 10.1” WSVGA (1024×600) LED Backlight | si |
ram | 1GB SO-DIMM DDR2 PC667 (up to 2GB) | - |
hd | 160GB - Sata II 5400rpm Hitachi | si |
scheda madre | - | si |
bios | AMIBIOS(C)2010 American Megatrends | - |
scheda video | Intel GMA 3150 | si |
wifi | WiFi 802.11b/g - Atheros AR2427 | si |
ethernet | Ethernet 10/100BT - Atheros AR8132 | si |
webcam | 0,3 Mpixels webcam | si |
audio(1) | card HDA Intel - chip Realtek ALC269 | si |
audio(2) | - | si, guarda la sezione bugs |
card reader | Alcor Micro Corp. Multi Flash Reader | si |
vga output | - | si |
porte usb | - | si |
touchpad | Multitouch | si, necessita di più test (per il multitouch e altro) |
tastiera | - | si, ma non tutti i tasti |
batteria | Batteria a 3 Celle - 48 Wh Lithium-Ion 4.400 mAh | 2h,30m massimo CONTRO 2h,50m su WIN con un uso normale |
(1)Altoparlanti interni e cuffie (2)microfono interno ed esterno
questo è l'hardware che ho testato ma altri modelli di EEEPC potrebbero variare un po'
Ho estratto le informazioni tramite:
Intel Graphics Media Accelerator 3150:
Intel driver work very well, in gnome and kde I tested “clone desktop” and “extended desktop” monitor configuration and work well.
Lighweight solution for use multi monitor or change resolution is: lxrandr but has few options, grandr is good but not work very well, xrandr from command line is better, I use with:
xrandr --output LVDS1 --mode 1024x600 xrandr --output VGA1 --mode 1024x768 --right-of LVDS1
3d work fine, glxgear report:
1522 frames in 5.0 seconds = 304.265 FPS 1534 frames in 5.0 seconds = 306.777 FPS 1522 frames in 5.0 seconds = 304.362 FPS 1498 frames in 5.0 seconds = 299.471 FPS 1536 frames in 5.0 seconds = 307.183 FPS
See also:
if egrep -iq 'touchpad' /proc/bus/input/devices; then synclient VertEdgeScroll=1 & synclient TapButton1=1 & synclient RBCornerButton=3 & synclient LBCornerButton=1 & synclient BottomEdge=4000 & synclient RightEdge=3500 & fi
parte del codice è stato preso dagli script di http://crunchbanglinux.org/
Questo è uno script utile ( touchpad_en.sh ) che abilita o disabilita il touchpad via synclient o gconf con libnotify ( guarda l'immagine sotto)
Io lanche questo script con i tasti W-A-p (Windows-Alt-p) da openbox aggiungente le seguenti righe a ~/.config/openbox/rc.xml nella sezione <keyboard>
<keybind key="W-A-p"> <action name="Execute"> <execute>/PATH_OF_SCRIPT/SCRIPT.sh</execute> </action> </keybind>
Se vuoi usare gpointing-device-settings cambia “SCRIPT.sh” con “SCRIPT.sh gconf”
Io ho aggiunto anche un controllo su conky (“TP” giallo significa che il Touchpad è abilitato), guarda la sezione keyboard
Le applicazione che uso con Openbox sono:
Questo invece è il mio autostart.sh in ~/.config/openbox e dall'autostart.sh lancio due istanze di conky con i file di configurazione conky_left e conky_right.
Ho scritto questa sezione perché non tutti i giochi funzionano bene, a volte per bug, a volte per hardware insufficente, a volte funzionano ma sono sviluppati per macchine con schermo più grande
Come inserire ulteriore ram: http://www.youtube.com/watch?v=UiKWDVTYFXs